Amigurumi Elephant Toma Free Crochet Pattern

The size of the finished toy with the materials I used is 32 cm. The size of the toy depends on the thickness of the yarn, the thickness of the hook and the density of knitting!

PATTERN: @Lilya Iskakova

Facebook group: Amigurumi Free Patterns

Necessary material for the elephant Toma:

1. Gray yarn, I had it a children’s novelty Pehorka 50g / 200m (it took almost 150g)

2. The yarn is blue

3. The yarn is pink

4. Hook 1.75

5. Filler

6. Needle for stitching

7. 2mm wire

8. Adhesive plaster

9. Wire cutters or, me old scissors

10.For the eyelet of a pair of black 6 beads 8 mm in size

11. A piece of pink felt – for a butterfly

12. Cardboard or plastic, for example, a lid from a mayonnaise bucket

13. Weightlifters, in my case it’s decorative glass pebbles

14. A pair of buttons

Abbrevations

Ch – chain

SL-ST – slip stitch

Sc – single crochet

Hdc – half double crochet

(12) – the number of loops in the knitted

a number of

“Decrease” – knit two columns of the previous row together

“Increase” – knit 2 columns in one column of the previous row

Chrome. – edge loop

1 = 2 – knit two from one loop

İnc – increase the front loop from the broach

Dec- knit 2 stitches together front

Knit – front loop

Purl – Wrong Loop

Head:

1) 6 sc into magic ring

2) İnc x6 times (12)

3) 1sc, inc x6 times (18)

4) 2 sc, inc x 6 times (24)

5) 3 sc, inc x 6 times (30)

6) 4 sc, inc x 6 times (36)

7) 5 sc, inc x 6 times (42)

8) 6 sc, inc x 6 times (48)

9) 7 sc, inc x 6 times (54)

10) 8 sc, inc x 6 times (60)

11) – 23) 60 sc (13 rows)

24) 8 sc, dec x 6 times (54)

25) 7 sc, dec x 6 times (48)

26) 6 sc, dec x 6 times (42)

27) 5 sc, dec x 6 times (36)

28) 4 sc, dec x 6 times (30)

29) 3 sc, dec x 6 times (24)

30) 2 sc, dec x 6 times (18) Thread cut

right handle Fingers (4 pieces)

1.6 sc into magic ring

2-3. bsc

Cut the thread, do not cut the thread on the last finger

Connect the fingers:

1. 3sc for the little finger, 3sc for the average, 6sc for the index, 3 sc for the average, 3 sc for the little finger (18)

2.18 sc

3.6 sc, 3 sc we knit together with the thumb, i.e. grab the thumb loop and handle loop, 9 sc (18)

4.6 sc, 3 sc on the thumb, 9 sc (18)

5-6. 18 sc At this stage we make a wire frame.

3 wires are made of approximately the same length, the fourth wire is made longer than the rest, then this wire will be attached to the tep frame. We isolate the junction with electrical tape. You can insert and knit further, I inserted the frame as I already knitted the entire handle, but filling in this option is more difficult

7. (dec, 7 sc) x 2 times (16)

8 – 22) 16 sc (15 rows)

Fasten and cut the thread

Left Handle:

Fingers (4 pieces)

1.6 sc into magic ring

2.-3. 6sc

Thread cut, on the last finger

do not cut the thread

Connect the fingers:

1. 3sc on the little finger, 3sc on the average, 6sc on the index, 3 sc on the average, 3 sc on the little finger (18)

2.18 sc

3.10 sc, 3 sc we knit together with the thumb, 5 sc (18)

4.10 sc, 3 sc on the thumb, 5 sc (18)

5-6.18 sc

7. (dec, 7 sc) x 2 times (16)

8 – 22) 16 sc (15 rows)

Fasten and cut the thread

Legs:

1.6 sc into magic ring

2. inc x 6 times (12)

3. (1sc, inc) x 6 times (18)

4. (2 sc, inc) x 6 times (24)

5. (3 sc, inc) x 6 times (30)

6. (4 sc, inc) x 6 times (36)

We cut a little shoe from cardboard or from a screwdriver from under the bucket, we also round the wire to the size of the foot, I advise you to take a wire of about 30 cm long, because it will then be inserted into the head thereby holding it.

7. Behind the back of the hinge 36 sc

8.36 sc

9.12 sc, 6ub, 12 sc (30)

10.- 22. 30 sc in the last row On one leg, we break the thread, on the second we do not break and connect the legs and knit the body

23. 7 sc, 3 ch, attach the second leg, 30 sc along the second leg, 3 sc along the ch, 23 sc along the first leg (66)

24. 7 sc, 3 sc by ch, 56 sc (66)

25.8 sc, inc, 14 sc, inc, 17 sc, 3 inc, 15 sc, inc, 6 sc (72)

26. – 35. 72 sc (10 rows)

At this stage, you can insert insoles in the legs, wire, as well as weighting materials (for example: stack. Pebbles, simple pebbles, coins). In my case, this is a stack.

pebbles for decor.

We continue to knit the torso

36. (10 sc, dec) x 6 times (66)

37 – 39.66 sc (3 rows)

40. (9 sc, dec) x 6 times (60)

41 – 42. 60 sc (2 rows)

43. (8 sc, dec) x 6 times (54)

44 – 45.54 sc (2 rows)

46. ​​(7 sc, dec) x 6 times (48)

47. 48 sc

48. (6 sc, dec) x 6 times (42)

49. 42 sc

50. (5 sc, dec) x 6 times (36)

51 – 52.36 sc (2 rows)

53. (4 sc, dec) x 6 times (30)

54 – 56.30 sc (3 rows)

We attach the handles, look so that the palms look inward

57. grab the loop of the hand and the loop of the heat, 7 sc handle + body, 8 sc for heat, 7 sc handle + body, 8 sc for heat (30)

58. knit 9 sc on the arm, 8 sc on the body, 9 sc on the hand, 8 sc on the body (34)

59.34 sc

b0. dec, 7 sc, dec, 6 sc, dec, 7 sc, dec, 6 sc (30)

61. dec, 6 sc, dec, 5 sc, dec, 6 sc, dec, 5 sc (26)

62. dec, 5 sc, dec, 4 sc, dec, 5 sc, dec, 4 sc (22)

63. dec, 4 sc, dec, 3 sc, dec, 4 sc, dec, 3 sc (18)

64. 18 sc

We fix the thread, cut off leaving the thread

for stitching the head

Sew on the head

Trunk:

1.6 sc into magic ring

2.İnc x 6 times (12)

3. 1 sc, inc x 6 times (18)

We cut cardboard or plastic at the office, but this is not necessary, I wanted the proboscis not to protrude from the filler, but to be even

4. Behind the back wall of the loop 18 sc

5.18 sc

6. (4 sc, dec) x 3 times (15)

7 – 14. 15 sc (8 rows)

15. (4 sc, inc) x 3 times (18)

16 – 17. 18 sc (2 rows)

18. (5 sc, inc) x3x (21)

19.5 sc, 6 HDC, 10 sc (21)

20.5 sc, 1 hdc, 1 inc hdc, 2 hdc, 1 inc hdc, 1 hdc, 3 sc, inc, 6 sc (24)

21. (3 sc, inc) x 6 times (30)

 We cut the thread, leaving

long tip for sewing, fasten and sew to the head.

HDC should be upstairs.

Ears

1.6c into magic ring

2.İnc x 6 times (12)

3. (1sc, inc) x 6 times (18)

4. (2 sc, inc) x 6 times (24)

5. (3 sc, inc) x 6 times (30)

6. (4 sc, inc) x 6 times (36)

7.36 sc

8. (5 sc, inc) x 6 times (42)

9-10. 42 sc (2 rows)

11. (6 sc, inc) x 6 times (48)

12 – 15. 48 sc (4 rows)

16. (6 sc, dec) x 6 times (42)

17 – 18. 42 sc

19. (5 sc, dec) x 6 times (36)

20. 36 sc

21. (4 sc, dec) x 6 times (30)

Fold the part in half and knit 12 sc, grabbing the front and rear loops. Cut the thread, leaving a long end for sewing

make out a face

Sew eyes:

at the level of 15 – 16 rows, between the eyes 9 sc. We introduce the needle at point 5, display at point 1, string the bead, insert the needle at point 2, display at point 5. These manipulations can be done several times. Tie the ends. Sew the second eye in the same way. Insert the needle at point 5, output at point 3, string the bead, insert the needle at the point, remove at point 5, tie, cut the thread and thread into the head

We sell a mouth – a smile

The toy is almost ready

Hair. Cut the threads 13-15 cm, take three threads, thread through the loop and weave a pigtail to the desired length

Tail do exactly the same

Knitting pants

Starting pink leg

Knitting 40 stitches

and distribute to 4 knitting needles

1-4. We knit with an elastic band (1 knit, 1 purl)

5-12. Knit facial (8 rows), change the color to blue

13-23. we knit with the front ones (11 rows) We remove one leg on additional knitting needles (circular). We knit the second leg in the same way. We connect the legs. The junction of the legs will be the beginning of the row

24 – 28. 80 knit (5 rows)

29. 9 knit, from one we knit 2 loops (hereinafter 1 = 2), (19 knit, 1 = 2) * 3 times, 10 knit (84)

30.10 knit, 1 = 2, (20 knit, 1 = 2) * 3 times, 10 knit (88)

31 – 60. 88 knit (30 rows)

61.10 knit, 2 loops together (hereinafter dec), (20 knit, dec) * 3 times, 10 knit (84)

62 – 64. 84 knit (3 rows)

65.9 knit, dec, (19 knit, dec) * 3 times, 10 knit (80)

We divide the pants on the front and back, i.e. 40 loops

Knit before

66 .chrome, dec, 34 knit, dec, chrome (38)

67.crome, 37 purl (38)

68.chrome, dec, 2 knit, dec, chrome (36)

69.chrome, 35 purl (36)

70.chrome, dec, 30 knit, dec, chrome (34)

71.krom, 33 purl (34)

72 .chrome, dec, 28 knit, dec, chrome (32)

73.krom, 31 purl (32)

74 .chrome, dec, 26 knit, dec, chrome (30)

75.krom, 29 purl (30)

76 .chrome, dec, 24 knit, dec, chrome (28)

77.krom, 27 purl (28)

78 .chrome, dec, 22 knit, dec, chrome (26)

79.krom, 25 purl (26)

80.chrome, y6.20 knit, dec, chrome (24)

81.krom, 23 purl (24)

82.chrome, dec, 18 knit, dec, chrome (22)

83.krom, 21 purl (22)

84.chrome, dec, 16 knit, dec, chrome (20)

85.chrome, 19 purl (20)

86.chrome, dec, 14 knit, dec, chrome (18)

87.krom, 17 purl (18) We close the loops, leaving the loops for the straps

88. chrome, 4 knit, 8 loops close, 3 knit, chrome

We knit webbing

1, 3, 5, 7, 9, 11, 13 rows. Chrome, 4 purl (5)

2, 4, 6, 8, 10, 12 rows. Chrome, 3 knit, chrome (5)

Close the loop

We knit the second strap in the same way

We knit the back just like before

We knit the straps up to the 11th row

12. chrome, knit, 2 loops close, chrome

13. chrome, dial 2 loops, 2 purl

14. chrome, 3 knit, chrome

15. chrome, 4 purl

16. close the loop

Sew the hole between the legs, fasten all the threads and refuel. Sew on buttons

Pocket

Dial 21 loops

1, 3, 5, 7 rows. Chrome, 19 knit, chrome (21)

2, 4, 6, 8 rows. Chrome, 20 purl (21)

9.chrome, dec, 15 knit, dec, chrome (19)

10. chrome, 18 purl (19)

11. chrome, 17 knit, chrome (19)

12. chrome, 18 purl (18)

13. chrome, dec, 13 knit, dec, chrome (17)

14. chrome, 16 purl (17)

15. chrome, dec, 11 knit, dec, chrome (15)

16. chrome, 14 purl (15)

17. chrome, dec, 9 knit, dec, chrome (13)

18. chrome, 12 purl (13)

19. chrome, 11 knit, chrome (13)

20. chrome, 12 purl (13)

Crochet Pants Knit Pink Pants

1.40 ch, lock in the ring

2 – 3. 2 ch, 40 HDC, sl-st Change to bare yarn

4 – 7. 2 ch, 40 HDC, sl-st We knit the second leg in the same way We connect the legs, each new row starts with 2 ch, finish sl-st

8.20 HDC for the first leg, 40 HDC for the second, 20 HDC for the first (80)

9 – 12.80 hdc (80)

13.21 hdc, 2 dec hdc, 3b hdc, 2 dec hdc, 15 hdc (76)

14.21 hdc, dec hdc, 3b hdc, dec hdc, 15 hdc (74)

15.2 hdc, dec hdc, 35 hdc, dec hdc, 32 hdc (72)

16. (10 hdc, dec hdc) X6 times (66)

17. 66 hdc

18. (9 hdc, dec hdc) X6 times (60)

19. b0 hdc

20. (8 hdc, dec hdc) X6 times (54)

21. (7 HDC, dec hdc) X6 times (48)

We fix the thread, cut it. Divide the pants in half, on the front and back, i.e. 24 HDC.

Divide the pants in half, on the front and back, i.e. 24 HDC. We connect the thread to the side and knit before:

22.4 sc, 16 HDC, 3 sc, sl-st, turn

23. 2 sl-st, 2 sc, 14 HDC, 2 sc, sl-st, turn

24. sl-st, 2 sc, 12 HDC, 2 sc, sl-st, rotation

25. sl-st, 2 sc, 10 HDC, 2 sc, sl-st, rotation

26. sl-st, 2 sc, 8 HDC, 2 sc, sl-st, rotation

27. ch lift, 2 sc, 6HDC, 2 sc, sl-st, turn

28 .– 29. Ch, 10 sc, rotation. We fix the thread and hide. We knit the back part similarly. We knit the straps

30 – 46. Ch, 4 sc, turn

47. ch, 1 sc, 2 ch, 1 sc, turn

48. ch, 4 sc We fix the thread, and hide the second strap. We knit in the same way. Sew buttons, sew a hole between the legs.

Pocket

1.16 ch, 15 sc by ch, turn

2. Ch, 15 sc, turn

3. Ch, 15 sc, turn

4. Ch, Dec, 11 sc, dec, turn (13)

5. Ch, dec, 9 sc, dec, turn (11)

6. Ch, 11 sc, turn

7. Ch, Dec, 7 sc, dec, turn (9)

8. Ch, 9 sc, turn

9. Ch, Dec, 5 sc, dec, turn (7)

10 – 11. Ch, 7 sc, turn

We fix the thread, leave a long tip for sewing

Cut a butterfly from felt and glue it on a pocket