Amigurumi, Amigurumi Animal, Amigurumi Free Patterns

Amigurumi Christmas Teddy Bear Free Crochet Pattern

Necessary materials and tools:

1. Yarn of a DC color for the Bears body (I have Alize Cotton Gold No. 21

(gray)), edge DC (Alize Cotton Gold No. 243), white (Alize Cotton Gold No. 01),

dark blue (Alize Cotton Gold No. 245), Alize Softy No. 55 (white)

2. Filler (holofiber)

3. Hook number 2

4. Black beads for eyes d4 mm (4 pcs)

5. Spout 13 * 15 mm black (2 pcs)

6. Blue ribbon 3 mm wide

7. White beads d6 mm 7pcs, d4 mm 1pcs

8. Glue

9. Black thread floss for decoration muzzle

10. Long needle for stitching parts

11. Scissors

 When using these materials, the finished toy size is 12cm.

Terms;

sc> single crochet

inc> increase

dec> decrease

Ch> chain

Blo> knitting from the loop

Flo> knitting from the front loop

SL-ST> slip-stitch

HEAD 2 pcs

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: (1 sc, inc) * 6 (18)

4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

5 row: (3 sc, inc) * 6 (30)

6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)

7 row: (5 sc, inc) * 6 (42)

8-13 row (6 rows): 42 sc

14 row: (5 sc, dec) * 6 (36)

15 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)

16 row: (3 sc, dec) * 6 (24) begin to fill

17 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)

18 row: (1 sc, dec) * 6 (12) fill to the end

19 row: 6 dec (6) pull the hole, hide

tail.

EAR

Knit 2 color details and 2 details

white color. Do not fill.

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: (1 sc, inc) * 6 (18)

4 row: 18 sc, sl-st

Cut the thread, leaving a long end for

sewing, fold your ear in half and sew two

side for the loops of the last row.

Muzzle

We knit 1 color and 1 white

colors.

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: (3 sc, inc) * 3 (15)

4 row: 15 sc, sl-st

Cut the thread, leaving a long end for

sewing, do not fill.

HEAD REGISTRATION

Symmetrically sew the ears to the head between 4

and 11 rows (i.e., 5 to 10 rows),

try them first and fix

needles.

Then center between 10 and 17 rows

place the muzzle, fill it a little in

sewing processes.

We divide the floss thread in half and fix

at the bottom of the head, put the thread in the middle

spout, make a stitch in 2 layers, 3 rows down and

we deduce where the eyes will be, leave.

Glue the nose. Sew the eyes between 10 and

11 rows (rasl-standing between them 4 sc or 5

sc, depending on the density of knitting),

pass the thread 2-3 times, slightly pulling in

sewing processes if 5 sc rasst-stoyanie.

With the same thread we embroider the eyebrows, output the thread

at the bottom of the head, fasten, trim.

BODY OF FATHER FROST

Knit with color yarn, fill

tightly as you knit.

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: (1 sc, inc) * 6 (18)

4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

5 row: (3 sc, inc) * 6 (30)

6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36) 7-8 row (2 rows): 36 sc

9 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)

10 row: we change the thread to the edge and knit for

rear floor hinges (30 BLO)

11-13 (3 rows): 30 sc

14 row: (3 sc, dec) * 6 (24)

15 row: 24 sc

– start to fill

16 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)

17 row: 18 sc

– fill

18 row: (1 sc, dec) * 6, sl-st (12)

– fill up

the end.

Cut the thread, leaving a long end for

sewing, fill.

In the 10th row, where we knit for the rear floors of the loop

for the remaining floor loops we knit 30 sc yarn

Alize Softy.

BODY

Knit with DC color yarn, fill

tightly as you knit.

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: (1 sc, inc) * 6 (18)

4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

5 row: (3 sc, inc) * 6 (30)

6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36) 7-8 row (2 rows): 36 sc

9 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)

10-11 (2 rows): 30 sc

12 row: change the thread to dark blue and knit 30 sc

13 row: we knit a loop 30 sc for the rear floor

(30 BLO)

14 row: (3 sc, dec) * 6 (24)

15 row: 24 sc – start filling

16 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)

17 row: 18 sc – fill

18 row: (1 sc, dec) * 6, sl-st (12) – fill to

the end.

Cut the thread, leaving a long end for

sewing, fill.

DRESS

In the 13th row, where we knit for the rear floors of the loop,

for the remaining floor loops begin to knit

skirt.

1 row: 3 ch, 1 DC in one loop, one loop

skip to the next 1DC, ch, 1DC, then

DCow we skip the loop and the next

1DC, ch, 1DC, continue to the end of the row, sl-st at

the end.

2 row: 2 ch, 1DC, ch, 2DC in one loop as

shown in the photo, then in each air

loop of the previous row 2DC, ch, 2DC, sl-st in

the end.

3 row: 2 ch, 1DC, ch, 2DC in one loop, then in

each air loop of the previous row

2DC, ch, 2DC, sl-st at the end.

4 row: 3 ch, 2HDC, ch, 3 HDC in one loop,

then into each air loop

previous row 3HDC, ch, 3 HDC, sl-st at the end

5 row: change the thread to Alize Softy and knit sc in

each loop, sl-st at the end, fasten the thread and

crop.

FRONT FEET

We will knit 2 legs with a red blouse and 2

pcs with dark blue.

We start to knit with yarn of DC color.

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3-4 (2 rows): 12 sc

5 row: 4 sc, dec, dec, 4 sc (10)

6 row: change the thread to the edge DC (Santa Claus)

either on a dark blue (DC little girl) and knit for

rear floor hinges 10 sc

7-12 (6 rows): 10 sc, fill the part tightly,

but not much

13 row: 4dec (6)

Cut the thread, tighten the hole and hide

thread inside the part.

In the 6th row, where we knitted for the rear floor of the loop, for

the remaining half loops knit 10 sc yarn

Alize Softy.

HINDER FEET 4pcs

Knit with DC color yarn, fill

tightly as you knit.

1 row: 6 ch

2 row: 4 sc in the second loop from the hook, 3 sc in

loop the top, then knit on another

chain side: 3 sc, inc (12)

3 row: inc, 3 sc, 3inc, 3sc, 2inc (18)

4 row: 1 sc, inc, 4 sc, inc, 3 sc, inc, 4 sc, inc, 2

sc (22)

5-6 (2 rows): 22 sc

7 row: 7 sc, 4dec, 7 sc (18)

8 row: (1 sc, dec) * 6 (12)

9-14 (6 rows): 12 sc

15 row: 6 dec (6)

Cut the thread, tighten the hole and hide

thread inside the part

TAIL

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: 12 sc

Cut the thread, leaving a long end for

sewing, do not fill.

 We sew the head to the torso and proceed to fastening the legs.

THREAD FOOT FASTENING

 Symmetrically try on the legs to the body and fix them with needles.

We’ll plant a toy, check the location of the legs, so that everything is

exactly. When the desired position of the legs is found, proceed to

mount. Fix the thread folded in half between 6 and 7 next. We introduce

the needle in the torso at the place of attachment of the back foot and bring to

opposite side, at the attachment point of the second foot. Thread through

the needle between the 13th and 14th rows of the hind foot and grab 3 sc, re-enter

the needle in the body, we deduce where the thread was fixed, pull the foot and

let’s check whether the situation suits.

Then attach the second foot and insert the DCova needle into the torso.

We display the thread in the same place where the first foot was attached, tighten, check

position. If everything suits, then go through two more times for the best

consolidation. Then we introduce the needle in the place of attachment of the lower legs and

print between 4 and 5 next to the top at Santa Claus, and between 3 and 4 next

on top of the little girl, where we will attach the front legs. Thread the needle into

foot between 11 and 12 rows and grab 2 sc. Display thread on

the opposite side at the attachment point of the second foot. Pull up

thread and check the position. Sew on two times, similar to the back.

Insert the needle at the attachment point of the forelegs and draw the thread approximately

where the tail will be located, fix the thread, cut it off.

Try on and sew the tail.

Hats Santa Claus

We start knitting with a pompom with Alize Softy yarn

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3-5 row (3 rows): 12 sc

6 row: 6 dec (6) change the thread to the edge,

fill the pompom.

7 row: 6 sc

8 row: (1 sc, inc) * 3 (9)

9 row: (2 sc, inc) * 3 (12)

10 row: (3 sc, inc) * 3 (15)

11 row: (4 sc, inc) * 3 (18)

12 row: (5 sc, inc) * 3 (21)

13 row: (6 sc, inc) * 3 (24)

14 row: (7 sc, inc) * 3 (27)

15-16 row (2 rows): 27 sc

17 row: (8 sc, inc) * 3 (30)

18 row: (9 sc, inc) * 3 (33)

19-20 row (2 rows): 33 sc change the thread to Alize

Softy

21 row: 33 sc, sl-st

We fix the thread, cut it off. 8 row from

bend the pompom cap and fasten it with a stitch

inside the cap. We will sew a hat to the head.

Hat

Start knitting with a dark blue thread

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: (1 sc, inc) * 6 (18)

4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)

5 row: 24 sc

6 row: (3 sc, inc) * 6 (30)

7 row: 30 sc

8 row: (9 sc, inc) * 3 (33) change the thread to Alize

Softy

9 row: 33 sc, sl-st

We fix the thread, cut it off.

POMPON

Knit with yarn Alize Softy

1 row: 6 sc into magic ring

2 row: 6 sc

3 row: (1 sc, inc) * 3 (9) at the end of sl-st, thread

cut, sew the pompom to the hat.

We will sew a hat to the head of the young lady.

DECORATION

 Fix the white thread over the front paws and collect 6 white

beads d6 mm, fix the thread on the opposite side above the second

paw.

 We will make a bow with long ends 3.5 cm in size, sew

in the middle is a white d6 mm bead and sew a bow in the center of the dress.

Let’s make the second bow with short ends 1.5 cm in size, embroider

in the middle bead d4 mm and sew to the cap.